TP-Link CPE510 5GHz 300Mbps 13dBi Outdoor CPE
TP-Link 5GHz 300Mbps 13dBi
Outdoor CPE
5GHz 300Mbps 13dBi Outdoor CPE,
Point to Point Wireless Bridge,13dBi, 15km+.
The CPE510 is dedicated to cost effective solutions
for outdoor wireless networking applications.
With its centralized management application, it is
flexible and ideal for point-to-point, point-to-multipoint
and outdoor Wi-Fi coverage applications.
Enterprise Hardware
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high-quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna. Dedicated metal reflector ensures higher gain and lower noise interference.
15km+ Wireless Data Transmission
Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+ , tested in the field.
FEATURES
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna.
- Adjustable transmission power from 0 to 26dBm/200mw.
- System-level optimizations for more than 15km long range wireless transmission.
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications.
- Centralized Management System – Pharos Control.
- AP / Client / AP Router / AP Client Router (WISP) operation modes.
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely.
SPECIFICATIONS
HARDWARE SPECIFICATIONS
Processor
- Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
Memory
- 64MB DDR2 RAM, 8MB Flash
Interface
- 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
- 1 Grounding Terminal
- 1 Reset Button
Power Supply
- Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
- Voltage range: 16-27VDC
Power Consumption
- 10.5 Watts Max
- Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
Dimensions ( W x D x H )
- 8.8 x 3.1 x 2.4 in
Antenna Type
- Built-in 13dBi 2 x 2 Dual-polarized Directional Antenna
- Beam Width: 45° (H-Plane) / 30° (E-Plane)
Protection
- 15KV ESD Protection
- 6KV Lightning Protection
Enclosure
- Outdoor ASA stabilized plastic material
- IPX5 waterproof Certification
WIRELESS SPECIFICATIONS
Wireless Standards
- IEEE 802.11a/n (with Pharos MAXtream disabled)
Proprietary Protocol
- TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds
- Up to 300Mbps (40MHz,Dynamic)
- Up to 144.4Mbps (20MHz,Dynamic)
- Up to 72.2Mbps (10MHz,Dynamic)
- Up to 36.1Mbps (5MHz,Dynamic)
Frequency
- 5.15~5.85GHz
- Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Transmission Power
- 23dBm/200mw (Adjustable power by 1dBm)
- Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
SOFTWARE SPECIFICATIONS
Wireless Configurations
- Pharos MAXtream TDMA Technology
- 802.11a/n Modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS Enable/Disable
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging (AP mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
- Wireless Advanced:
- > Beacon Interval/RTS Threshold/Fragmentation
- >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management
- Discovery and Remote Management via Pharos Control application
- HTTP/HTTPS Web-based management
- System Log
- SNMP Agent(v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
System Tools
- Wireless Signal Quality Indicators:
- Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
- System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications
- Hardware watch dog
POE ADAPTER SPECIFICATIONS
Dimensions(W x D x H)
- 4.3 x 2.2 x 1.3 in
Interfaces
- 1 AC Jack with Earth Ground
- 1 10/100Mbps Shielded Ethernet Port (Power + Data)
- 1 10/100Mbps Shielded Ethernet Port (Data)
Button
- Remote Reset Button
Power Status LEDs
- Green
Input
- 100-240VAC, 50/60Hz
Output
- 24VDC, 1A Max
- +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Efficiency
- >80%
Certifications
- CE/FCC
Package Contents
- Outdoor Wireless CPE
- 24V 1A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide
System Requirements
- Google Chrome, Safari, and Firefox browsers for web GUI management
Product Code: CPE510
Warranty: 1-Year Warranty
